iFuge HCT NXT Hematocrit Centrifuge
The hematocrit centrifuge is equipped with a maintenance free drive, a large display and a simple interface for silent & efficient operation in the lab. This centrifuge comes with a host of safety features including imbalance detection.
FOR MAINTENANCE FREE LONG LIFE
TO SET TIMER UPTO 12 MINS
FOR ADDED CONVENIENCE
500 - 12000 RPM
TO EASILY SWITCH BETWEEN RCF & RPM
USERS CAN SET FAVORITE MODE WHERE SPEED AND TIME CAN BE CHANGED AS PER REQUIREMENT
• Microprocessor controlled for efficient performance even under high load.
• Two preset feature to set favorite mode where speed and time can be changed as per requirement.
• HCT rotor with screw-on lid for better contamination protection.
• Compact design saves valuable bench space.
• Brushless DC Motor-Low maintenance and long lasting.
• Precise RPM Control from 500 to 12000 RPM with increments of 100 RPM.
• Lid Lock Safety: Lid releases automatically after run completion.
• Run Timer with up to 12 minutes of run time.
• Display toggle to alternate between RPM and RCF.
• Large LCD Display for easy setting control and parameter display.
This is a bench top centrifuge which is designed to hold 40 / 75mm length capillaries with 1mm diameter in its 24 position; aiding separation / sedimentation of aqueous solutions & solvent suspensions of differing densities.
• Power Adaptor: Input Voltage: 100-240V, 50/60Hz, output Voltage:24V-6A
• 24 slot Capillary Tube Rotor (Pre-installed)
• Blood reader
• T-Allen wrench
• Product user manual and warranty card
Specifications | iFuge HCT NXT |
Rotor Capacity | 24 * 75 mm length capillary tubes |
Max RPM / RCF | 12000 RPM / 14118g |
Motor Type | BLDC |
Display | Digital display |
Speed Setting | 500-12000 RPM |
Timer Setting | Up to 12 mins |
Preset Feature | User can set parameters beforehand |
Rotor | HCT rotor with screw on lid |
Weight of Equipment | 4.5 kg / 9.92 pounds |
Dimension ( L*W*H) | 330 x 265 x 161 mm / 1.08 * 0.87 * 0.53″ |
Acceleration Time | 60 ± 5 seconds |
Braking Time | 70 ± 5 seconds |
Ambient Time | 5 – 40 °C |
Permissible Relative Moisture | < 80% |
Altitude | Use up to an altitude of 2000m above MSL |
Pollution Degree | 2 |
Environment | For indoor use only |
Input Power | 24V — 6A |
Power Consumption | 132W |
iFuge HCT NXT | ||
Product Name | Cat # | Details |
iFuge HCT NXT | HC02 – 1110 EU/AU/UK | Hematocrit centrifuge |